Tenax Rivo 50 - A&B, 1 Each Quart
- Gel time in bulk at 77º: 50 min
- Tacky free time at 77º: 150 min
- Minimum reaction temperature: 50º
- Temp range for use after hardening: -13º to 143º
- Ratio of glue to hardener: 1:1 mix ratio
Rivo 50 A & B is a knife grade epoxy designed for all types of stone. Rivo is one of the strongest epoxies in the stone industry. It will bond to almost any surface. Rivo 50 is designed for permanent application. The stone will break before the bond will. Suitable for temperatures below 32° as well as extreme heat. Recommended for both interior and exterior applications. Material must be dry before application. Straw in color. VOC Compliant.
INSTRUCTIONS FOR USE
Make sure surface to be treated is completely dry and clean. Keep the glue and hardeners in their original cans. If using an automatic dosing pump avoid contact with metals made of copper, brass or similar metals which may rust. Avoid use of PVC plastic. Use only plastic that is corrosive resistant. Measure out, in either weight or volume, the correct amounts of part A and part B. Mix well using clean tools. Best when applied in a thin layer. Use acetone or butyl acetate to clean tools.
SHELF LIFE
Keep the containers closed after use. Keep away from heat, humidity and sun light. This product will last 2 years under normal conditions between 65° and 77°.
SAFETY
Please read the safety data sheet before use and follow the product instructions.