PERFORMANCE
This performant silicone wax for stone and other materials increases the vibrancy of the surface it is used to treat. Repelling stains, fingerprint resistance, and leaving a smooth surface is what Shinex was formulated to achieve.

COMPATIBILITY
As multi-material product, Shinex is engineered for use on many surfaces worked in the industry. Fabricators use Shinex on both engineered and natural stone surfaces including:

• Granite

• Marble

• Travertine

• Agglomerate

• Quartz

• Other Stone Types

FINISH FRIENDLY
Shinex is also "finish friendly" in that it is used to treat a number of finishes. Everything from a smooth polished finish to a rough rustic surface. Even flamed finishes are treatable with Shinex liquid silicone stone and surface wax.

EASE OF USE
Shinex is formulated and packaged for easy use. This liquid silicone wax can be easily applied using a brush, cloth, sponge, or through a sprayer to coat the surface to which it is being applied. Shinex's fluid properties make it easy to spread or spray on the surface of the material.

---

SHINEX AT A GLANCE
FEATURES

• No Fingerprints

• Easy Application

• Easy Buffing

• Rapid Drying

• Reduces Stains 

COMPATIBILITY

• Marble

• Travertine

• Agglomerate

• Granite

• Quartzite

FINISHES

• Rough

• Honed

• Flamed

• Brushed

• Polished 

---

DIRECTIONS FOR USE:
Shinex performant liquid silicone surface wax is designed for simple application. Shinex is best applied to surfaces using the following steps:

1. Prior to first treatment of each material, test the product on an inconspicuous part of the material.

1. Thoroughly clean the surface to be treated and completely dry it before applying Shinex Liquid Silicone Wax.*

1. Using a spreading applicator such as a cloth, brush, sponge, or a sprayer, evenly apply just enough liquid for to the surface to absorb in a few seconds.

1. Allow the material to absorb the liquid.

1. Using a clean cloth buff the treated surface.**

1. Repeat the previous steps again after waiting 10-15 minutes. ***

1. After use, close can tightly so it is sealed well.

* Any dirt or debris that is on the surface during the application hinders the uniformity of the product's coverage.

** Any excess product that remains on the surface will create a superficial glossy and sticky film on the surface of the material.

*** If treating floors, do not allow the surface to be walked on for at least 24 hrs after application.

SHINEX LIQUID SILICONE WAX COVERAGE

One liter of Shinex surface silicone wax has the potential to treat 20-30 m 2 of stone depending on the stone's absorbency. The stone's consumption rate is directly related to the porosity of the material being treated.

STORAGE OF SHINEX LIQUID SILICONE WAX

Under standard use and work conditions, Shinex is guaranteed for 24 months when it is properly stored in the tightly sealed, original can away form heat sources, humidity, and direct sunlight.